Tudor 1:1 replica watch,zf Black Bay replica watch,ZF factory Black Bay Tudor 1:1 replica watch M79250BM-0005 comparison with genuine product review
ZF factory Biwan Tudor 1:1 replica watches M79250BM-0005 compared to the authentic review with the authentic difference and quality, quality, workmanship described below:文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
ZF is well made, the details are exquisite, the simulation of the bottom even with the authenticity of the put together without pressure文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
Do a whole comparison first left for the original right is ZF original disassembled and worn so the color of the strap and the case looks traces of use ah~!文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
Comparing the luminous beads, the color of the bezel and the scale both match perfectly.文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
Because the original is closer to the original, it looks whiter. Let's take a look at the logo font (thickness, height and weight) and the hands (including the order of the needles and the small holes in the center axis) on the upper and lower parts of the face. It's difficult to identify the authenticity with the naked eye.文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
The more the graduated metal pack matches, the more the luminous part is filled with the same thickness
The glass coating process utilizes highly translucent transparent films.文章源自复刻手表-https://www.bbtwatch.com/en/dj/ddpc/93042-html
Comparison of the four peaks of the lugs and the bezel, as well as the dimensions of the case, confirms that ZF and the original version of the head of the watch are 100% synchronized with the glass is arched, hollowed out in the middle and slightly raised, the process is complex, the yield is low!
Here to mention the bronze Tudor with the material is aluminum bronze (aluminum and bronze mixed material) not tin bronze (tin bronze oxidation reaction faster 382 is used is tin bronze) and ZF material and the original consistent. Advantage is that even after oxidizing the effect is also a more than restore the authentic temperament!
The original cover material for the steel pvd close to the color of bronze to accompany the overall design, the bottom cover engraving for the corrosion process, ZF mountain products must be a fine product, the bottom cover material and process belongs to the original coincide with, no mistakes!
Buckle details show ~ the original pair of belt buckle at least 4000 to start. Let's see where the gap exists between the two
The same genuine picture reference, interested friends can click the following picture to view the genuine real picture, you can make a full range of comparisons, whether they are high ceiling replica watches and genuine comparisons will also have small details of the difference Oh!
