Rolex ceiling watch, C Factory Daytona replica watches, C Factory Daytona Rolex 1:1 replica watches m116508-0013 compared to the genuine review
C厂劳力士一比一超A精仿手表宇宙计型Daytona列m116508-0013对比评测跟正品的区别及质量，品质，做工描述如下：文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
1. This launch is all gold Ditonne the hottest green gold Ditonne the following will be shown in detail true and false comparison文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
2. The biggest feature of this time is this gold green dial, the development time is close to two years, has been back and forth constantly modified, not exaggerating, this is the only green on the market to the version. But capacity is very limited.文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
3. The dial part also uses a 3-section splicing head grain, all loose parts plating文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
4. Bezel part of the font thickness, as well as the most important, black oil filling is the same as the original, frosted texture. This is also the only one to do so, the back of the detail picture and compare.文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
The biggest feature of this time, gold and green dial, green with light gold, because it is the original open mold so each cd pattern size, font, and all kinds of dial details are restored as much as possible.文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
The spikes as well as the luminescent fill also follow the original as closely as possible. As you can see from the red three-dimensional printing in the dial, both the height/dimensionality/shape of the printing are basically the same.文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
This piece of green Goldie is the current location, remove the most expensive one of the open mold, although the cost is very high, but the factory has always adhered to the attitude of no original not to do goods, the cost is never a problem, since I dared to shoot a comparison picture is not afraid of other people nitpicking. It is impossible to say that it is the same, but it must be the industry benchmark.文章源自表探-https://www.bbtwatch.com/en/dj/lspc/93353-html
About Pointers
Pointer from the Panda Dee's v1 version has been criticized by watch friends, the height is too high, the solid center axis is not obvious enough, as well as burrs, we have also been trying to modify, has been I think relatively for the above problems in time for the modification.
This green Goldie's pointer because it is electroplated 18k gold, in order to maintain Pointer / dial tsk head crown nail / scale nail / case / circle mouth / bottom cover / handle / strap / raw child, all the accessories of different accessories factory, unified electroplating processing, the reason for doing so is to maintain this gold color consistency, the current position, c factory gold color is the most right version of the light yellow gold on the market, so to keep the good stuff! Even upgrade the bad things also listen to the opinions and suggestions timely and effective modifications
Precious metal engraving on the bottom of the case
A detailed comparison of precious metal engraving on white gold models has been done before, so I won't go into that here, but will focus on the following points.
1. The upper right figure original is 750 logo, because the original is 21 early purchase, until 21 years, the official all the precious metal models engraved 750 part, all modified to Au750, you did not see the wrong, is the upper case A and lower case u combination.
2. The 750 balance in the lower left corner is also modified from the original gourd appearance to an octagonal shape, also with 750 days
Flat Logo.
This needs to be noted, and not c factory arbitrary modification. Engraving effect specifically look at the picture
c factory in two years ago for the first time using three-stage splicing head grain, as well as the strap more than a hundred parts, all bulk plating / ps bulk plating cost more, familiar with the watch friends about the strap this text is probably can be recited backwards, here is no need to repeat to say. A lot of people say that c factory is a shit stirrer, constantly to the peers to create trouble, from the beginning of the scale nail rounded grinding, solid center shaft, clean ceramic ring, as well as splicing head grain. And so on. From the c-factory's point of view, it's never a bad idea to do every single accessory as much as possible, and for the watch enthusiast, adding a few hundred dollars to the cost can result in a more perfect product. Just for customers who trust c-factory, this is never a problem. Three or two thousand are spent, no one will add hundreds of dollars. Those who can will be able to do so, and in the future, c-factory will present more and better products!
About the color of the clasp spring plate
As you can see on the picture, the original as well as the c factory clasp spring plate part is steel color, yes, the original that spring plate is steel, because the 18k gold plate is not enough elasticity, all styles of Rolex, all gold, all rose gold are steel spring plate, this detail has never been done right by any factory. This a very small detail, of course, the same problem with the full gold strap, need to assemble after bulk plating, perhaps other factories do not have the original, or they do not want to trouble, so others do not do things, c factory to complete, and set an inconspicuous industry standard, not steel color shrapnel full gold Rolex, can not be called a top replica. This clasp started to be utilized on the all-gold Rolex model a few months ago, but we don't want to mention it specifically, and a few months later other factories still haven't modified it. Completely incomprehensible. c factory from scratch, and then now, the product is recognized, never with a muddled attitude to do everything, but also at the same time thank you for the support of the watch friends.
Released at the same time there are these 4 models, Yu has previously shot a detailed true and false comparison chart, the two models below and the original do almost the same, in addition to emphasize a point, the two models below the chronograph subdials of the original is pure black, just a little bit of the official effect picture of the feeling of coffee color, the follow-up will be shot of the true and false comparison charts of these two models. Because the accessories process is too complex, so the number of shipments is very small.
The same genuine picture reference, interested friends can click the following picture to view the genuine real picture, you can make a full range of comparisons, whether they are high ceiling replica watches and genuine comparisons will also have small details of the difference Oh!
