1:1replica watchesMaintenance Technical Answers
Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
As a precision mechanical device, watches are very common in daily life. However, every watch has a complex mechanical structure behind it, and these structures will be affected to a certain extent by the performance and precision of the watch with the passage of time and long-term friction and wear. In response to this problem, there are more and more1:1 Replica WatchesThese watches are highly restored to the design and texture of the original watches, and at the same time require more complicated maintenance and repair. This article will give a detailed introduction to the maintenance techniques of 1:1 replica watches.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
I. Mechanical structure of 1:1 replica watchesArticle from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
The mechanical structure of a 1:1 replica watch is relatively more complex, because when it is replicated in accordance with the structure of the original version of the watch, for the maintenance personnel, it is necessary to have an in-depth understanding of every detail and component. A replica watch mainly consists of the movement, movement accessories, case and strap.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
Second, the common faults of 1:1 replica watchesArticle from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
1:1 replica watches still encounter a variety of problems in the course of use, the following are some common failure situations:Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
1, the dial does not go or slow: this situation is usually due to movement blockage or movement wear caused by the need to clean or replace the movement.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
2, the strap is loose: this situation has little impact, can be repaired by replacing the strap.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
3, strap fracture: this situation is more serious, need to be replaced, but because 1:1 replica watches spare parts are more difficult to find, so need to spend a lot of time and energy.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107312-html
Third, 1:1 replica watches repair technology
For the above mentioned several common failure conditions, the following corresponding maintenance techniques are described in detail:
1, movement cleaning or replacement: for 1:1 replica watches movement cleaning or replacement, need to be very careful, because each part needs to be carefully disassembled, cleaned and installed. In the process of cleaning, the movement needs to be disassembled first, cleaned up each part, eliminated impurities, and then lubricated and assembled. If the parts are found to be very badly worn, they need to be replaced.
2, strap replacement: if the strap of the 1:1 replica watches has a loose problem, it can be replaced in a relatively simple way. You need to choose the corresponding strap for replacement according to the material and color of the surface. For matching the surface not quite match the strap, you can use the adapter to match.
3, strap fracture repair: for 1:1 replica watches strap fracture case, because spare parts are more difficult to find, so need to be more careful. You can try to glue it together, or you can repair it by patching the strap.
Fourth, 1:1 replica watches repair precautions
1, learn to disassemble and assemble: for the disassembly and assembly of 1:1 replica watches, you need to be very careful and must follow the correct steps and methods of operation. If you are very uncertain, it is best not to try any disassembly operation.
2, maintenance movement: 1:1 replica watches movement needs regular maintenance, and need to follow the manufacturer's maintenance methods, regular replacement of grease, to avoid minor wear and tear and scratches.
3, to prevent collision: 1:1 replica watches often have a high degree of ornamental and preservation of value, but the movement is extremely precise, so you need to avoid collision and fall so as not to cause irreparable damage to the movement.
This article from the 1:1 replica watches mechanical structure, common failures, repair techniques and notes four aspects of a detailed introduction, I hope to be able to help the study and practice of watch repair.
