Replica watches regulator adjustment method

replica watchesGovernor tuning method

 Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

The regulator is an important part of the replica watch, which can make the timekeeping of the replica watch more accurate. However, the accuracy of the regulator will decrease with the increase of using time. In this article, we will introduce how to adjust the governor of replica watches to ensure the precision and accuracy of replica watches.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

Step 1: Adjust the hairspringArticle from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

Adjusting the hairspring is a basic job of adjusting the regulator of a replica watch. The position of the hairspring will directly affect the performance of the replica watches. To adjust the hairspring, you need to bend the double hooks on the hairspring to the correct position with the tip of a fine needle. The hairspring should be in the center of the regulator, so that the balance wheel of the replica watch can swing freely, and at the same time, the hairspring should not be too tight, otherwise the replica watch will lose balance and the timekeeping will be inaccurate.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

Step 2: Adjust the springArticle from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

Adjusting the spring is another essential task in adjusting the regulator of a replica watch. The tension of the spring affects the running speed of the replica watches. Generally speaking, the higher the tension of the spring, the faster the replica watch will be. In order to adjust the spring, you need to use a spring tension gauge to slacken or tighten the spring until the developed tension is reached. You also need to make sure that the tension of the spring is even and does not deviate.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

Step 3: Adjusting the Mass CompensatorArticle from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

The mass compensator is an important part of the replica watches regulator. It can make the replica watches more accurate. To adjust the mass compensator, you need to use glasses and a microscope to carefully observe the position and deviation of the compensator. Generally speaking, the position of the compensator should be in the exact position without deviation. If the position of the compensator is incorrect, it needs to be adjusted appropriately to bring it to the correct position.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

Step 4: Adjusting the flywheelArticle from watchdetective replica - https://www.bbtwatch.com/en/wbzs/107466-html

The flywheel is another important part of the regulator of the replica watch, which can make the timekeeping of the replica watch more accurate. To adjust the flywheel, you need to use glasses and a microscope to carefully observe the position and deviation of the flywheel. Generally speaking, the position of the flywheel should be in the exact position without deviation. If the position of the flywheel is incorrect, it needs to be adjusted appropriately to bring it to the correct position.

Governor adjustment requires patience and care, the use of professional tools, and a certain level of skill. If you are not familiar with replica watch adjustment techniques, please do not easily try to adjust the governor to avoid damage to the replica watch. If you have any questions or need professional help, please consult professionals.