Often customers say, my watch stopped today, is not a high imitation of the watch is too much garbage, and then asked to know that it is not wound, this high imitation of the watch is the same as the genuine watch. Think of a time to see a video, there is a tycoon bought a few hundred thousand on the question of why such an expensive watch can not go by itself, the businessman on the spot collapse, millions of cars will not automatically open ah. Still need someone to drive, the watch also need to wind. Even if it is a self-winding watch, today we will talk about mechanical watches to not regularly wind this thing.
Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
First of all, it is important to know that mechanical watches are divided into two categories: automatic mechanical watches and manual mechanical watches. As the name suggests, manual mechanical watches, need to be wound up manually. So if it is a manual mechanical watch, then you must regularly wind the watch regularly. So maybe some people will say, automatic mechanical watches, as the name suggests, are automatically wound, do not need to be manually wound?Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
The answer is no. Generally speaking, automated mechanical watches are indeed only worn daily indeed do not need to be wound, but if the wearer exercises less or does not wear them while they are being worn, then even automated mechanical watches need to be wound regularly. Why?Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
You'll understand when you see how a machine automatic watch works. This automatic watch is not automatic, it relies on the swinging of the human arm, which drives the winding coil to tighten through the constant oscillation of the rotating weights on the movement for automatic winding. So once it's not wound (movement) enough, it needs to be rewound by hand. Therefore, at the beginning, the watch enthusiast's view that "mechanical watches need to be wound regularly in addition to being worn every day" is a bit one-sided. However, if your automatic mechanical watch does not run, you can indeed try to wind it, maybe it does not have enough movement.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
One might ask, so which one is better? What about the automatic mechanical watches that are premium imitation watches and manual mechanical watches? Most of the mechanical watches on the market are automated, does that mean it is better? When there is enough movement, a mechanical automatic watch is more convenient than a manually operated watch, which is its greater advantage. This is because when there is enough movement, the automatic winding will be able to keep the watch running when it is worn normally. Manual winding, on the other hand, requires that you have to manually replenish the energy of the winding every once in a while, and once you forget it, it will stop.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
In addition to this advantage, high imitation watches also have the advantages of automatic winding, such as higher precision, because compared with the mechanical handmade watches, automatic watches adopt the design of anti-over-winding, which provides more consistent energy and smooth output torque. The timing of the watch is more stable with less error. In addition, automatic winding is more suitable for waterproof design, which is not difficult to understand, because automatic winding is different from manual winding, the watch handle is different from manual winding, it is bound to produce greater wear and tear. Diving watches are usually automated, that's why.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
But if the wearer does not have enough movement, the mechanical watch automatic clockwork will not be completely full, the watch will often appear to stop walking, wearing walking, under the stop and other faults, at the same time, the table timing accuracy is poor, the error is larger. For example, work all day are sitting in the office, most of the cases just arm horizontal swing, rarely do up and down vertical swing, then the automatic gyroscope basically do not do work, so can not wind up, such a situation is not as good as the hand winding accuracy. There are also some people who find it more convenient to wear a watch by hand, which is also a matter of personal feeling. In addition, the playability of the mechanical hand-wound watch and the beauty of the core are also its advantages, especially the fast experience of hand-winding is irreplaceable.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
For the question of whether the high imitation watches should be full strings. According to professional repairers, it is definitely better to wind up to 80% and 90% than to 100%, because if the winding is too high, the windings inside the watch will be pulled too tight, which will definitely affect the watch. When winding, if you feel resistance, you must not keep tightening it. Since the watch itself is a precision instrument, you will most likely cause damage to the internal parts of the watch if you continue with force after feeling resistance. For watches that are not worn frequently, you can use a watch shaker, or just wind the watch once or twice a month.Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html Article from watchdetective replica - https://www.bbtwatch.com/en/wbzs/61474-html
