Clean Factory Yacht 126622 Comparison
文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
CLEAN/c factory launch yacht 40mm series 126622.ps/126655 rose gold version recently launched 1.left/right GEN=genuine clean=clean factory products
2. The gray side of the left side appears to have a somewhat large color difference because it is in a softbox, but in natural light, the similarity is as high as 95% or more, and a natural light comparison will be released later.
3. The right side of the blue side, c factory compared to the real thing, the blue is slightly lighter, of course, the characteristics of the radiating pattern plate is in different light presents the color is not the same, accurately, RGB color value in a benchmark, the overall will not have too much deviation. Because the c factory in the whole radiating pattern dial, such as the water ghost plate, all kinds of log disk, as well as the yacht plate involved in the color radiating pattern, are used with the authentic consistent pvd plating process, the advantage is to ensure that the color of the shipment will not be due to the batch of different, and the hue of the differentiation. The other is the thin layer of plating, can clearly see the bottom of the sun pattern but is the high cost.
4. This ring mouth using plating pvd white gold + anti-fingerprint coating, the ring mouth material is also generally brass changed to steel, that is to say, even if the ring mouth has bumped, plating layer damage. Reveal the bottom color, he is also and white gold is the same. But steel hardness is higher than general brass. Also in the processing and cost of dawning. 
文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
Case left and right sides of the curvature as well as the shape of the basic 100% similarity, the same also uses 904L steel bottom cover part, the bottom cover and the case where the case fit, the bottom of the case slightly bulging, which is also one of the characteristics of the yacht case puts the head of the crown part of the stereoscopic, as well as the curved three three points of the arrangement. Size, shape are done consistently. Special note, the yacht's outer ring rotation feel, this time also and the real thing to do almost the same, bi-directional rotating bezel on top of the base, a circle of 120 small cells, every time you turn a little bit, you can feel a hint of a sense of frustration, not as hard as the water ghost, not gmt frustration so strong. This can only be realized. However, when using it, you also need to be careful because it is a frosted backing of the ring mouth, so there may be scratches, this is unavoidable. The rim will also be easy to dirty, use hand sanitizer + soft bristle toothbrush to clean it. 
文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
The strap and the case with the upper and lower fit, the distance of the gap, in each style, are not the same, so they are buying the original disassembly copy, to match, you can see the case front and the strap articulation, the upper and lower two bends, the middle of the bulge, the details of the place, can be seen c factory in the details of the control. Strive for perfection. The case and the bottom of the strap to match, can also be seen through the picture, even the rounded ends of the strap and the case inside the groove curvature to achieve a tight fit.
The engraving on both sides of the case, note note note, important thing to say three times, is the engraving, the engraving is characterized by a stronger sense of three-dimensionality, and in the middle of the word groove, accompanied by the flash of stars. This is in the need to remove the strap to see the place, c factory also spared no effort to make it out. It's not perfect, but it's the best it can do. The same is true for human beings. 
文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
As you can see in the picture above, the entire literal color palette is, basically, close. It doesn't want to be as obvious a color difference as the just larger image, including the real thing, which is infinitely closer in color.
Six o'clock position, blue font printing / also known as Tiffany blue, three-dimensionality, color tone are done quite perfectly. Six o'clock position, red font printing, although the picture is one less, but can be said responsibly, and blue is the same level. 
文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
The six o'clock position that was just lost The blue disk red font comparison can be found back in this kind of chart. You see, I really did not blow water it, red font color / three-dimensional sense is very close to it. I told you. c factory will not blindly blow. You can see the overall appearance of the pointer is close to the real thing. But through the picture above also found two problems. First, the two gray/blue yacht, hour hand of Mercedes l0go, thickness is not the same. Second, the genuine second hand of the printing oil, as far as possible and inkjet traces. And it's a problem with both genuine seconds hands. After all, this is a comparison of the real thing, not a critique of the real thing. Maybe, the second hand without inkjet is not a genuine second hand!
The above picture can be seen, the shape of the pointer, the color is relatively close. The level of craftsmanship is also noteworthy has been spit on the c factory needle shaft shape problem. In the yacht has also been solved. 
文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
The strap part, will not repeat here. Let's just say that it maintains the usual standard of 904L steel with various details of chamfering and polishing
The strength of the opening and closing, and the feel of the press.
Compared to other products, it is whiter and brighter as well as more delicate.文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html 文章源自复刻手表-https://www.bbtwatch.com/en/dj/103256.html
