replica watchesMaintenance master experience sharing
文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
Nowadays, more and more people choose replica watches instead of original watches, which are relatively cheap and the quality can be guaranteed. But even replica watches need repair and maintenance, so today we are going to talk about how to repair replica watches.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
Step 1: Check the movement文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
For replica watch repair, the first thing to do is to check the movement. Because the movement is the core part of the watch, if there is a problem with the movement, then the watch will not function properly. Common movement problems include balance wheel not rotating, not running, time not allowed, etc.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
If any of these problems occur, the movement needs to be checked. When checking, you need to dismantle the dial, and be careful to be gentle so as not to damage the movement. After removing the dial, the movement is carefully inspected to confirm where the problem lies and then repaired.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
Step 2: Replacement parts文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
There is not much difference between the structure of a replica watch and an original watch, so the parts of a replica watch can also be common to the original watch. If there is any damage to the movement parts, you can consider replacing the parts.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
Replacement parts need to pay attention to two points, one is to choose the same size and material as the original, and the other is to ensure the quality of the parts. Choosing defective parts will affect the service life and accuracy of the watch, so it is important to choose branded regular parts.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
Step 3: Cleaning the movement文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/100190.html
The movement will gradually accumulate dust as it is used, and if the movement is too dirty, it will cause the watch to run inaccurately, or even not run at all.
For movements that are heavily soiled, they need to be cleaned. Cleaning is done by placing the movement in a washing machine with a cleaning agent, after which it is rinsed with water, dried and reassembled.
It is important to note that the crown needs to be removed before cleaning is carried out to avoid water getting inside the case.
Step 4: Adjust Calibration
After repairing the movement, the replica watch needs to be calibrated. Calibration requires professional calibration tools, including timers, manipulators and so on.
You need to pay attention to the problem of time difference when calibrating, i.e. comparing the time of the replica watch with the standard time and making fine adjustments. After calibration, you can adjust the position of the crown according to the daily use habits, so that the time of the watch is more accurate.
Repair and maintenance is the key to the long-term use of replica watches, the above is the replica watch repair some specific methods and precautions, I believe that these experiences can help more replica watch enthusiasts to better maintain their own table.
