How to adjust the three subdials of the Rolex Daytona
Rolex Watch Daytona Classic 3 subdials are normal line hour dials with 204060 accuracy, 102030 accuracy, and 36912 accuracy.The specific adjustments are shown as follows.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
1. Tightening position: When the crown and all push buttons are at 0, the case is fully tightened to ensure water resistance.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
2、Manual Chain:Pull out the spinning loose crown and rotate the crown clockwise to manually _ wind up the watch; counterclockwise rotation cannot wind up the watch. If the watch has stopped running or first time adjustment, it needs to be rotated at least 25 times instead of winding.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
3、Adjust the time: loosen the crown and pull it out, the small second hand stops immediately so as to adjust the time accurately; adjust the hour and minute hands can be rotated clockwise or counterclockwise.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
After each use of the adjustment function, carefully rotate the crown to ensure that it is close to the case and to ensure that it functions as water-resistant as it should, first pushing it back into position and then gently pressing the crown while tightening the case clockwise; do not loosen the crown under water.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
What is the Ditoner made of?文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
Carbon fiber Vititrona also has a variety of design concepts. In addition to the standardized carbon fiber case, the design concept of the garden plate is also quite impressive, mainly including colorful new trend scheme design, breaking the Rolex traditional stereotype.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
The 40mm size is as easy to control as a regular Daytona. The whole case is made of carbon fiber material. Carbon fiber material is a new material. The color is timeless black. The overall lines are very elegant and luxurious. Carbon fiber is soft on the outside and hard on the inside. Its relative mass is lighter than that of metal tin, but its tensile strength is higher than that of steel, and it is resistant to corrosion. The matte black pattern of the case is complex and varied, taking into account the cutting technology is not the same, each piece of carbon fiber material watch is going to show different line shape. In such an era that advocates uniqueness and distinctiveness, carbon fiber watches have become a unique existence.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
Mirror glass choose to use sapphire crystal mirror glass, solid color without blue film, clear and deep, good scratch resistance. White engraved on the circle, this round number is used to measure the speed of the English and digital, using the chronograph function to calculate the speed per hour. White engraved on the bezel with the same spacing and neatly printed font.文章源自复刻手表-https://www.bbtwatch.com/en/wbzs/76589-html
The classic nail structure logo of the Ditonner is used on all hour marker scales. The Rolex branding is set at 12 o'clock on the dial. Three subdials are used. a CD pattern design with double hour and minute hands marking the time display, a long hand pointing to 12 o'clock for the chronograph seconds, a 30-minute display subdial set at 3 o'clock and a 12-hour display subdial set at 6 o'clock.
The mirror fits closely to the outer ring inlay, which ensures waterproof function for daily wear. As you can imagine, in the hot summer, wearing a carbon fiber watch not only has a light and comfortable wearing experience, but also has a special dark pattern texture that makes you easily become the focus of attention.
The case thickness is only 12.4mm slim, really an unimaginable thickness, and starts very comfortable, the slim body allows it to be gently hidden in a shirt cuff. The side crown and the two chronograph buttons are black and very mysterious. 2 o'clock button is the timekeeping on and pause button, 3 o'clock is the button for time adjustment and 4 o'clock is the chronograph reset switch. At the same time, the crown continues the patented triple-button lock waterproofing system, which is dead-screwed to the case just like the chronograph buttons, and a small Rolex watch crown.
The curved ears are also designed to fit the wrist with sharp angles. The side profile is clear, the metal brushing is meticulous, the wire frame is distinctive and smooth, more and more beautiful and attractive. Carbon fiber is very durable, abrasion-resistant and resistant to knocks, and is indeed a model for Rolex! It remains a dense design and the unique carbon fiber pattern looks very attractive. The engraving on the high tenacity carbon fiber material case is even more honed technology. The engraving is clear and strong without any mud.
The strap is designed with Velcro paper, made of positive nylon, cowhide leather, and the color of the stitching on both sides has a summer feeling. The buckle material is also carbon fiber, with DiW exclusive imprint engraved on both sides of the buckle.
